Inductive Couplers,Wireless Couplers and Pipe and Cable Snooper Accessories

Available Accessories

	I.C.49 Inductive Coupler Traditional 3" budget coupler. Compatible with all Aquatronics tracing instruments.

	I.C.56 Inductive Coupler Traditional 5" Coupler for use with any Aqua-Tronics tracing instruments.

	I.C.56WT Wireless Inductive Coupler This is an all new remote wireless inductive coupler with super safe housing and extension clamp-on feature. Its tone transmitter is built into the handle, so there is no cord to create problems or danger. The design provides automatic positive seating of the coupler contacts, plus unique technique for manipulating the jaws at the end of a lineman's hot-stick. Inside diameter of jaws is 14.29cm.

	Sewer Snooper for non-metallic pipe location. The Sewer Snooper is a small radio transmitter designed to easily travel inside a 4" non-metallic pipe attached to a standard rodding machine or sewer tape. It is 2 inches in diameter and 6.5 inches long. As it is forced through the pipe, any of Aqua-Tronics receivers trace the position and depth up to 50 feet. Mini Snooper is a smaller version 1.5 inches diameter and 4 inches long, operating in pipes as small as 3 inches diameter and can operate to a depth of 25 feet. On a flexible leader, it can negotiate a 90 degree turn in a 3 inch pipe.

	A-Frame A dual sensor ground probe is available for making a rapid search on a long line. The probe spread is 24 inches. The A-Frame can be purchased as an accessory to the EG-3000 or as a substitute for the standard stirrup probes.

	Stirrup Probes allow penetration of the toughest soil conditions while reducing force exerted on the microphone. They are made of very durable sand-cast aluminum and have 3/8 inch diameter stainless steel spikes.