Macey's Electrical Logo

  A433R Test Station 

 

You are here:

  A433R/203C/213R and 213 Ordering Details
Navigation:  Home > Clare Test Equipment Index > A433R Description > Ordering Details/Options >
 


 

 A433R Combined
Comprehensive Test Stations  
           

Ordering Details/and Options


 
Ordering Details
Order Codes Description
A433R/203C/213R 'One-Shot' semi-automatic Comprehensive Test Station
A433R/203C/213 Manual Comprehensive Test Station
 
 
 
Options
Option Codes Description
/G Terminal for guard switch.
/N

 		 Measurement circuit connected to an adjustable electronic trip. (normally Open volt-free contact for connection to external lamp or alarm - 240V/2Amp max.)
/NB As /N but with instrument mounted audible alarm.
/NL As /N but with instrument mounted fault lamp.
/NN As /N but with dual trips for setting High and Low pass bands on '0% Deviation' bridges.
/NNB As /NN but with instrument mounted audible alarm.
/NNL As NN but with instrument mounted fault lamps.
/T
 		 Internally fitted timer, adjustable from 0 to 60 seconds, for timed application of specific test.
/RCCB
 		 Mains load test protected by non-lethal RCCB to permit adjustments on live appliances.
/VAR Variable load voltage at up to 2.5A. (higher ratings on request)
/ZCS Zero crossing switch added to Flash Test circuit.
/SCD Short circuit detection pre-test for single phase load tests.
 
 
 
Flash Test Options
Option Codes Description
/203D
 		 Change 203C to 203D to increase Flash Test voltage to 0 to 5kV a.c.
Supplied with Safety Probe for testing Double Insulated products.
/TL Total Leakage measurement in place of Insulation Resistance  0 to 15mA.
/110V auto transformer 240/110V to allow mains testing of 110V a.c. products.
/500VA
 		 Flash Test transformer rating increased to satisfy standards of high trip levels.
/303J Addition of a.c. and d.c. test voltages up to 5kV.
 
 
 
Load Test Options
Option Codes Description
/AM
 		 Ammeter scaled 0 to 15A and 0 to 1.5A (for checking current drawn by product at mains voltage).
/140

 		 Direct reading linear wattmeter.
Ranges available - 0 to 50, 0 to 250, 0 to 1000 or 0 to 5000 Watts.
(please specify required range at time of order)
/212K Wattmeter Bridge for checking resistive loads at mains potential.
Measurement range - 200 to 4000 Watts against internal reference values. Centre Zero meter including ±10% Deviation.
/212KB

 		 As 212K but with a remote Load Box for selecting up to 6 pre-set load values to suit the product range. (please specify required values at time of order).
/309

 		 High accuracy Resistance Bridge for resistive loads.
Measurement range - 1 to 1199.9 ohms.
Centre Zero meter indicating ±10% Deviation.
/3PH Three phase ammeter load measurement with Phase selector switch.
/LL Live Load test, no indicator.

 

Accles & Shelvoke| Aqua-Tronics | Arbiter Systems | Clare Instruments | Haefely | Hipotronics | HV Diagnostics | Megger | Tettex | T & R Equipment  
 Home Page | High Current | High Voltage | Cable Fault | Oil Test | Transformer | Insulation 

 
Macey's Electrical Pty Ltd
ABN 17 344 601 468
Unit 1, 49 Gavenlock Road,  Tuggerah,  Sydney  Australia  2259
 

Phone: 61 2 4353 4644 

Mobile: 0412 678 925

 Fax: 61 2 4353 4424

mailto:sales@maceyselectrical.com.au
 

Copyright: 1978 to 2007                                                   Last update: Friday, 03 October 2008