Description The Model HVA 30 manufactured by HV Diagnostics is a Four
in One Universal High Voltage Test System. It is the smallest,
lightest and most advanced Universal test instrument
available, and is ideally suited for a variety of
applications.
FEATURES
VLF (0.1Hz), DC
(±), Cable Fault Conditioning (Burning), and Sheath/Jacket
Testing modes all included.
VLF is the proven
and accepted replacement for the traditional DC Hipot or
"proof" test for solid dielectric cables such as XLPE and
EPR.
Fully automatic or manual cable
test sequences complying with International Standards/Guides
such as IEEE 400.2, VDE 0296 and CENELEC etc.
True Symmetrical Sinusoidal, load
independent, output waveform across the full load range.
Real-time display of actual output
waveform.
Easy to use, ergonomic, menu
guided, large backlight user interface.
Large output load capability (up
to 5 µF).
Automatic and integrated load
capacitance measurement with optimum frequency selection.
No oil or arcing contacts that
require routine maintenance.
Short circuited protected with
active arc management regulation that avoids the usual
nuisance tripping of conventional HV test equipment when a
dielectric failure occurs.
Safety Features
Status display of all important
safety functions and messages.
Safe, easy to use operation with
emergency Off and key switch Lock-out.
Fully integrated discharge circuit
to safely ground the Device Under Test after testing.
