The HVA front panel
controls are simple and very easy to use. The backlit LCD
display keeps the operator fully informed during the testing
procedure. All testing modes and operations are continually
updated on the LCD screen.
Setup Screen
The initial screen giving the operator the test options.
Selection is made by utilising the front panel digital
control wheel.
0.1Hz sinusoid screen
In the testing screen all measured parameters are displayed.
In addition the status of the VLF waveform is also shown
together with the exact position in the cycle. The screen
shown is displaying a 0.1Hz sinusoidal waveform.
0.1Hz square wave screen
The LCD screen will also show all the other output voltage
conditions. Shown here is the square wave output. The like
the above screen the status of the waveform is also shown
together with the exact position in the cycle.
The reporting screen
The report screen gives the operator all the test results
which can then be downloaded to a laptop or PC.
The HVA results software
The results screen gives all the test data including cable
type, location and all the test parameters measured during
the testing process.
