Insulation Resistance Testing instruments Megger model MIT520, 5kV and MIT1020, 10kV Applications

Models MIT520 and MIT1020
5kV and 10kV Insulation Resistance Testers

Megger Models MIT-520 and MIT-1020. These 5kV and 10kV insulation resistance testers are designed specially to assist you with the testing and maintenance of high voltage electrical equipment.

These 5kV and 10kV insulation resistance testers are designed specially to assist you with the testing and maintenance of high voltage electrical equipment.

IEEE 43-2000 recommends the use of 10kV for motor windings rated above 12kV and the model MIT1020 facilitates this.

The case is incredibly rugged and easy to carry, being made of tough polypropylene and achieving an ingress protection rating of IP65. In addition, the model number is marked on both the top and side of the case for ease of identification in stores or vehicles.

Delta wye transformer being tested with the Megger Model MIT-520 Insulation Resistance Tester.
Delta wye transformer
being tested with the
MIT_520 Tester

Applications

The MIT-520 and MIT-1020 are designed for testing the
insulation of high-voltage electric equipment. Their wide
voltage range also allows applications for low-voltage
equipment. Generators, motors, transformers, cables and switchgear all require effective maintenance. The test techniques on the instruments provide valuable diagnostic information.

Both instruments test the insulation resistance of:

High-voltage power cables and high-voltage buses.
Large motor/generator windings.
Line and substation transformers.