|
Product
Description
The 100ADM mk2 is the new
replacement for the 100ADM. The 100ADM mk2 retains everything that
was good about the 100ADM, but updates the design to make it
easier to use. The unit is tougher, lighter, more accurate, and
better protected than the 100ADM. Automatic mains voltage
selection and a memory ammeter complete the package.
The 100ADM mk2 provides
commissioning and maintenance engineers with a flexible system for
testing protective systems. It has an easy to understand panel
layout and a simple user interface. The status of every function can
be seen at a glance, and there are no complex menus to navigate.
The unit has a
range of outputs allowing injection of currents as low as a few mA
and as high as 100A. Voltages up to 240V are available on the main
outputs, allowing high impedance current relays and voltage relays
to be tested. Four true RMS metering ranges are provided, allowing
the full scale of the meter and trip level to be set independently
of the selected output. Industry standard safety connectors are
used on all inputs and outputs for convenience, reliability and
safety.
The 100ADM mk2 is
comprehensively protected by overcurrent, duty cycle and thermal
trips, and keeps the user fully informed of any trip condition.
 |
The
back-lit display on the 100ADM mk2 is bright and clear with
a wide viewing angle. The results of a test can be seen here
as they appear on the display |
|
