Macey's Electrical - Servicing Electrical Utilities - A complete Network of Quality Equipment  
VLF and Cable Diagnostics Primary and Secondary Current Oil Testing Resonant and Impulse Test  
Insulation Test Cable and Fault Location High Voltage Transformer Test  

   Home | About Us | Contact Us | Site Map | All Products |
                                                                                    | b2 High Voltage | Partial Discharge PD Series | PDTD90-2


PDTD90-2 Partial Discharge Test
  Product Links
  VLF High Voltage HVA Series
  Tangent Delta TD Series
  Partial Discharge PD Series
  Oil Testing - BA Series
PDTD90-2 Specifications
    Additional Features
 ●  Lightest solution
 ●  measurement and calibration
 ●  Leakage currents detection
     and correction for Tan Delta





b2 electronic Diagnostics System PDTD90-2 (combined with VLF generator1) provides a pure sinusoidal output voltage with stable frequencies. This is a pre-condition of direct comparison of PD and TD diagnostics results across cables of different lengths. The characteristics at ever-changing frequencies and varying output voltage waveforms provide no basis for reliable comparisons. Pure sinusoidal output voltage is recommended by standards (such as IEEE400.2-2013) and therefore clear guidelines and test procedures are provided.

With PDTD90-2 - VLF testing1, PD diagnostics and TD diagnostics can be carried out simultaneously, saving time and avoiding preconditioning of the cable, which would lead to false results.


   ●  Simultaneous PD and TD measurement
   ●  Small, light and portable units
   ●  b2 Suite® - comprehensive diagnostics software and data base
   ●  Easy and clear process of PD measurement
   ●  Manual and automatic diagnostics modes
   ●  Saves all data automatically
   ●  PD-locating and phase-resolved presentation of PD
   ●  PD magnitude
   ●  High noise reduction
   ●  Comprehensive but easy reporting
   ●  Filter for suppressing noise signals
   ●  Measurement setup according to IEC 60270 for Partial discharge
   ●  Monitored Withstand Test (MWT) according IEEE400.2-2013

The comprehensive control and diagnostics software b2 Suite® makes the process of diagnostics easy as never before, guiding the operator step by step through the entire process. The b2 Suite. Data Base allows your data to be processed, stored and made available for future reference in just a few clicks.

Global Thinking - Local Action  

  Our Partners -- Your links to our Quality Products